Monthly Newsletter

Enter your email address to
sign up for our newsletter
Click For Deal Of The Day Click For Our ebay Store Click For All Our Free Shipping Products Our New Arduino Range
Home > Public Address > 100V Line Amplifiers
We found 13 results matching your criteria.
Sort By:
1 2
LR2 induction loop receiver by Adastra, Part Number 952.855UK
LR2 induction loop receiver
£25.00 Inc VAT

A compact, battery powered belt-clip receiver for testing and setting up induction loop systems.
3.5mm jack socket for headphone connection
Volume control and lo-cut switch to adjust sound quality
Can be used along with with an induction loop system to create an unobtrusive audio tour guide for art galleries, museums etc.
Supplied with in-ear headphones

Power supply - 9Vdc (PP3 battery included)
Controls - Volume, lo-cut switch
Connection - 3.5mm headphone jack
Headphone impedance - 32 Ohms nominal
Dimensions - 60 x 117 x 32mm
Weight - 80g (no battery)
Part Number - 952.855UK
Model Number - LR2
Barcode - 5015972172186

In Stock quantity shown is an estimate.

Need assistance or more information? Just ring 01246 211202 or email sales@jpgelectronics.com we're here to help.
CA30 compact 100V mixer-amplifier by Adastra, Part Number 953.103UK
CA30 compact 100V mixer-amplifier
£109.00 Inc VAT

100V line amplifiers with an integral mixer in a half width 2U housing. Inputs for microphones and line input are governed by front panel volume controls with a mixed line output. Mono output to either 100V line or 8 ohms speaker load is connected via a screw terminal connector on the rear panel. Providing cost-effective public address in small to medium installations.
Inputs for microphones and auxiliary line
100V or 8 Ohms operation

Power supply - 230Vac, 50Hz (IEC)
Output : signal - 2 x RCA
Outputs : speaker - COM / 8 ohms / 100V terminal connector
THD - <1%
Input : line - 2 x RCA
Input impedance : mic - 1.8k Ohms
Part Number - 953.103UK
Model Number - CA30
Barcode - 5015972172148

In Stock quantity shown is an estimate.

Need assistance or more information? Just ring 01246 211202 or email sales@jpgelectronics.com we're here to help.
Remote Indicator for Noise Limiter System by Adastra, Part Number 952.804UK
Remote Indicator for Noise Limiter System
£119.00 Inc VAT

A "Traffic Light" type remote indicator for use with the Noise Pollution Control System (952.801). Housed in a metal enclosure with adjustable mounting bracket.


Power supply - 230Vac, 50Hz
Lamp type - 60W, R80, E27
Dimensions - 470 x 105 x 195mm
Weight - 3.3kg
Part Number - 952.804UK
Model Number - NPR4
Barcode - 5015972054703

In Stock quantity shown is an estimate.

Need assistance or more information? Just ring 01246 211202 or email sales@jpgelectronics.com we're here to help.
CS60 Compact 100V Slave Amplifier 60W by Adastra, Part Number 953.102UK
CS60 Compact 100V Slave Amplifier 60W
£129.00 Inc VAT

A 100V line slave amplifier in a half width 2U housing. Features RCA line in and out with a master volume control. Mono output to either 100V line or 8 ohms speaker load is connected via screw terminals on the rear panel. Connect to a mixer amplifier to expand small to medium PA installations.
Compact solution for expanding PA installations
100V line or 8 ohms operation
Master volume control
RCA phono input and output

Power supply - 110/230Vac, 50/60Hz (IEC)
Dimensions - 329 x 210 x 84mm
Output power - 60Wrms
Weight - 4.72kg
Input - Line in (RCA)
Output : signal - 2 x RCA
Outputs : speaker - 100V / 8 ohms / COM terminals
Controls - Master volume
THD - <1.0%
DC power - 12Vdc option (screw terminals)
Frequency response : line - 93Hz - 16.3kHz
Max. input level : line - 7.2dBV
Signal to noise ratio - 90dB
Max. attenuation : line - 90dB
Part Number - 953.102UK
Model Number - CS60
Barcode - 5015972140833

In Stock quantity shown is an estimate.

Need assistance or more information? Just ring 01246 211202 or email sales@jpgelectronics.com we're here to help.
DM-8 Digital Messaging Unit by Adastra, Part Number 953.051UK
DM-8 Digital Messaging Unit
£129.00 Inc VAT

1U rack-mount digital messaging unit for scheduled audio playback. Audio files are stored on a removable SD card and may be transferred by inserting into a PC or Mac computer or directly recorded on the DM-8. A single mic/line input can be used for recording or for live announcements which can override SD playback. Up to 99 schedules can be programmed to play a particular audio file from the SD card, set by 24 hour time and day(s) of the week. The DM-8 can be added to any sound system to provide automated playback of timed announcements, music or audio alerts.
Up to 99 audio tracks stored on SD card
Up to 99 schedules programmable for playback
Repeat function for looped playback
Mic/Line input for recording or live announcements
19" rack mountable 1U

Power supply - 100-240Vac, 50/60Hz or 24Vdc
Fuse - T1AL 250V
Input - XLR or terminal (bal/unbal) mic/line
Audio source - Internal SD card player
Time setting - 99 programmable schedules - 24 hour + day(s) setting
Output - Mono balanced terminal or unbalanced RCA
Mic/line channel controls - Mic/Line level, Phantom power on/off, Vox priority on/off (DIP switches)
Phantom power - +20V
Input impedance - 2.2k Ohms (mic/line)
Controls - Data Dial, Edit buttons, Message, Mic/Line, Output level, power on/off
Trigger - Message 1-8, Stop & Ground contacts
SD card requirements - 4-32GB FAT32 (full size or with adaptor)
Dimensions - 483 x 150 x 44mm
Weight - 1.65kg
Battery - CR2016 button cell (internal clock)
Part Number - 953.051UK
Model Number - DM-8
Barcode - 5015972185872

In Stock quantity shown is an estimate.

Need assistance or more information? Just ring 01246 211202 or email sales@jpgelectronics.com we're here to help.
CA60 compact 100V mixer-amplifier by Adastra, Part Number 953.104UK
CA60 compact 100V mixer-amplifier
£149.00 Inc VAT

100V line amplifiers with an integral mixer in a half width 2U housing. Inputs for microphones and line input are governed by front panel volume controls with a mixed line output. Mono output to either 100V line or 8 ohms speaker load is connected via a screw terminal connector on the rear panel. Providing cost-effective public address in small to medium installations.
Inputs for microphones and auxiliary line
100V or 8 Ohms operation

Power supply - 230Vac, 50Hz (IEC)
Output : signal - 2 x RCA
Outputs : speaker - COM / 8 ohms / 100V terminal connector
THD - <1%
Input : line - 2 x RCA
Input impedance : mic - 1.8k Ohms
Part Number - 953.104UK
Model Number - CA60
Barcode - 5015972172162

In Stock quantity shown is an estimate.

Need assistance or more information? Just ring 01246 211202 or email sales@jpgelectronics.com we're here to help.
RS120 Slave Amplifier 100V by Adastra, Part Number 953.120UK
RS120 Slave Amplifier 100V
£199.00 Inc VAT

High power 100V line slave amplifiers in a 2U rack-mountable housing. Slave inputs can be connected from Adastra RM series mixer amplifiers and slave outputs onto further RS slaves. Master volume control governs output level to either low impedance or 100V speakers. Designed to power medium to large installations from a mixer output or expand existing systems.
RCA slave inputs and outputs
8 ohms and 100V line speaker output
Supplied with rack-mount ears
2U 19" rack mountable
Peak and signal LEDs

Power supply - 110/240Vac, 50/60Hz (IEC)
Input - RCA slave in
Output : signal - 2 x RCA
Controls - Master volume
THD - <1.0%
Outputs : speaker - 100V and 8 ohms
Part Number - 953.120UK
Model Number - RS120
Barcode - 5015972141120

In Stock quantity shown is an estimate.

Need assistance or more information? Just ring 01246 211202 or email sales@jpgelectronics.com we're here to help.
LA-600 mkII induction loop amplifier by Adastra, Part Number 952.867UK
LA-600 mkII induction loop amplifier
£289.00 Inc VAT

An induction amplifier for driving a cable loop around a room to provide assisted listening for hearing aid users. Front panel controls are adjusted using a screwdriver including level controls for the 3 mic/line channels, bass, treble and loop current. Designed to provide hearing assistance in public and commercial buildings.
Phantom power switch for each input
Mic/line level switch for each input
Adjustable metal loss correction
Alarm contacts for built-in siren
19" rack mountable
Tamper proof channel volume, bass & treble and loop current level controls
Priority switchable for channel 1
Peak current LED indication
Suitable for hearing aids fitted with a "T" switch

Power supply - 110/240Vac, 50/60Hz (IEC)
Frequency response - 50Hz - 5kHz (±3dB)
Input sensitivity : line - -6dBu/6k Ohms
Input sensitivity : mic - -56dBu/2k Ohms
Signal to noise ratio - 75dB (line), 60dB (mic)
THD - <1%
Part Number - 952.867UK
Model Number - LA-600 mkII
Barcode - 5015972169353

In Stock quantity shown is an estimate.

Need assistance or more information? Just ring 01246 211202 or email sales@jpgelectronics.com we're here to help.
LA-300 mkII induction loop amplifier by Adastra, Part Number 952.864UK
LA-300 mkII induction loop amplifier
£289.00 Inc VAT

An induction amplifier for driving a cable loop around a room to provide assisted listening for hearing aid users. Front panel controls are adjusted using a screwdriver including level controls for the 3 mic/line channels, bass, treble and loop current. Designed to provide hearing assistance in public and commercial buildings.
Phantom power switch for each input
Mic/line level switch for each input
Adjustable metal loss correction
Alarm contacts for built-in siren
19" rack mountable
Tamper proof channel volume, bass & treble and loop current level controls
Priority switchable for channel 1
Peak current LED indication
Suitable for hearing aids fitted with a "T" switch

Power supply - 110/240Vac, 50/60Hz (IEC)
Frequency response - 50Hz - 5kHz (±3dB)
Input sensitivity : line - -6dBu/6k Ohms
Input sensitivity : mic - -56dBu/2k Ohms
Signal to noise ratio - 75dB (line), 60dB (mic)
THD - <1%
Part Number - 952.864UK
Model Number - LA-300 mkII
Barcode - 5015972181843

In Stock quantity shown is an estimate.

Need assistance or more information? Just ring 01246 211202 or email sales@jpgelectronics.com we're here to help.
RS240 Slave Amplifier 100V by Adastra, Part Number 953.121UK
RS240 Slave Amplifier 100V
£299.00 Inc VAT

High power 100V line slave amplifiers in a 2U rack-mountable housing. Slave inputs can be connected from Adastra RM series mixer amplifiers and slave outputs onto further RS slaves. Master volume control governs output level to either low impedance or 100V speakers. Designed to power medium to large installations from a mixer output or expand existing systems.
RCA slave inputs and outputs
8 ohms and 100V line speaker output
Supplied with rack-mount ears
2U 19" rack mountable
Peak and signal LEDs

Power supply - 110/240Vac, 50/60Hz (IEC)
Input - RCA slave in
Output : signal - 2 x RCA
Controls - Master volume
THD - <1.0%
Outputs : speaker - 100V and 8 ohms
Part Number - 953.121UK
Model Number - RS240
Barcode - 5015972141144

In Stock quantity shown is an estimate.

Need assistance or more information? Just ring 01246 211202 or email sales@jpgelectronics.com we're here to help.
   
 
1 2